The Press Plate- Arbor Press Attachment

This arbor press attachment makes cutting out your leather with dies an absolute dream! 

If you have leather dies, you know you either need a clicker machine, arbor press or mallet. 

Clicker machines cost thousands of dollars.

Using a mallet eats up a lot of time and you can't let it bounce or you'll ruin your piece, lots of room for error.

Using an arbor press on it's own is great, but still, you have to hit your die at several different points to get it to cut all the way through the leather. 

For example, my pear shape die for earrings, I have to hit that on FIVE different spots to get it to cut all the way through. 

With this arbor press plate attachment you don't have to worry about any of those problems. Simply set your die on your leather and press out your shape in ONE go.

3x3 inch plate

The following is typical sizing. Please make sure to double check the measurements of your personal arbor press ram

1/2 ton - 3/4 inch ram

1 ton - 1 inch ram

2 ton - 1 1/4 inch ram 

5 ton - 2 inch ram 

(Ram- the square rod that the press plate will attach to)

Refunds will not be granted, however, you may exchange for a different size if needed. 

These are hand crafted locally in Redmond, Oregon. Made to order. Please allow 1-3 weeks for this item to ship.

Arbor press is not included. 

Once you receive your attachment all you have to do is press the ram rod into the square tubing and tighten down the included bolt. 

If you have any questions or need help picking out an arbor press, please reach out!

Don't forget to grab The Extension Handle, too!